首页 > 资料专栏 > 论文 > 生管论文 > 生产制造论文 > MBA论文_QJ公司压力容器制造项目质量保证体系优化研究

MBA论文_QJ公司压力容器制造项目质量保证体系优化研究

青珠家具
V 实名认证
内容提供者
热门搜索
资料大小:1311KB(压缩后)
文档格式:DOC
资料语言:中文版/英文版/日文版
解压密码:m448
更新时间:2020/2/27(发布于浙江)

类型:金牌资料
积分:--
推荐:升级会员

   点此下载 ==>> 点击下载文档


文本描述
摘要
压力容器是一种被广泛应用的承压设备,一般都在极其恶劣的条件下使用,在使用
过程中很容易因为外部条件的变化而出现各种事故。压力容器内部一般都盛装有一定毒
性和腐蚀性的介质,并且运行压力非常高。如果压力容器在运行过程出现事故,不但压
力容器本身会造成非常大的损坏,还会引起中毒、污染、爆炸等严重的次生灾害
压力容器通常都是定制型产品,具有投资大,结构复杂,生产制造周期长、产品制
造重复性低等特点。如何保证压力容器的产品质量,一直是压力容器制造企业关注的重
点。针对压力容器制造企业研究一套符合本单位实际的质量保证体系也是势在必行
本文首先对压力容器质量保证体系相关理论知识进行深入的研究,明确研究的主要
内容和思路,制定出研究技术路线图
结合目前QJ公司压力容器质量保证体系实际运行状况,对QJ公司的现状分别从组
织机构、质量方针、质量培训、质量文化等方面进行描述说明。利用SWOT理论对公
司的现状进行了分析,找出制约企业发展的因素,通过问卷调查的方式找出影响公司压
力容器质量保证体系运行的关键因素
针对QJ公司质量保证体系存在的问题,查找企业内部管理的深层次原因。分别利
用全面质量管理理论、PDCA循环理论以及质量管理八项原则等质量管理知识,从质量
策划、质量保证、质量控制和质量改进和质量保障因素等方面,完成对QJ公司质量保
证体系的优化和完善;
本文最后以乍得脱气塔容器项目为案例,分别从项目的概况,质量策划、质量保证
措施、质量控制实施、质量改进以及乍得脱气塔项目开展主体焊接的QC小组活动等方
面进行阐述,说明本文所构建的质量保证体系在压力容器制造项目中能够提高产品质
量,增进生产效率,降低劳动成本
本文的创新之处在于将质量管理理论知识应用到公司实际运行中,对公司的质量管
理体系进行了重建和优化,为公司继续完善和改进质量管理体系提供方法指导,具有较
强的实践应用价值
关键词:压力容器;质量保证体系;焊接QC小组
论文类型:应用研究
QJ公司压力容器制造项目质量保证体系优化研究
- II -
Abstract
Pressure vessels are widely used in People's Daily life, especially in science and
technology research and in the modern industry production.
Pressure vessels are very special equipment, they have poor working condition and also
have high pressure in the inner of vessels. So if the Pressure vessels are bombed can cause a
big disaster.
So, to ensure the quality of all the pressure vessels are tough job for all the vessel
manufacturers. How to ensure the quality and establish an assurance system for the pressure
vessel is very important for all the enterprises.
This essay is researched on many pressure vessel manufacturers, and find many issues in
quality assurance for the building of vessels.
The problems of the quality assurance for the vessel manufacturer is solved in this essay
through “quality planning, quality assurance system, quality control and quality
improvement” and also the essay discuss the management system ,technology and incentive
aspects .
At the end of this essay described Chad degassing boot for a typical case. This part of the
essay tell the overview of the chad degassing boot, “quality planning ,quality assurance&
quality control and quality improvement”. And also this essay described the QC group for the
welding of the main part of degassing boot.
We can find that this new pressure vessel quality assurance system build in this essay is
very effective in quality improvement and efficiency improvement of the pressure vessel
manufacture.
Key words: pressure vessel; Quality assurance system; Welding QC team。